220V 50Hz To 115V 400Hz Frequency Converter
video

220V 50Hz To 115V 400Hz Frequency Converter

The electrical power requirement of an aircraft is different from domestic power supply. It does not require the standard 50/60 Hz AC power supply used worldwide. Airliners require AC power at 115 Volt and 400 Hz electrical frequency.
Model: VFC
Rated Power: Client to specify
Input Voltage: 220VAC
Input Frequency: 50Hz
Output Voltage: 115VAC
Output Frequency: 400Hz
MOQ: 1 Set/Piece
OEM & ODM Service: Available
Brand: Noyark
Packaging: Plywood Case
Payment Methods: T/T, L/C, Western Union, Credit Card
Send Inquiry
Product Introduction

Specifications

Technology Solid-State PWM IGBT Design (Rectifier: SCR, Inverter: IGBT)
Rated Power Client to specify Display Touchable 7'' LCD Screen
Input Voltage 220VAC Input Frequency 50Hz
Phase Number Output Frequency 400Hz
Output Voltage 115VAC Output Waveform Sine Wave
Phase Number 1 Output THD ≤2% (Linear Load)
Protections Circuit Breaker, Fuse Blown, IGBT Fault, Over / Under Voltage, Over Current, Over Load, Overheat, Short Circuit
Overload 100% Load: Normal Operation 120% Load: 10s 150% Load: 1s 200% Load: Cut Off Output Immediately
Response Time 2ms
Altitude
≤1000m
Voltage Accuracy ±1%
Relative Humidity
≤95% (non-condensing)
Frequency Accuracy ±0.01%
Ambient Temperature
-15℃ to +45℃
Cooling Forced Air Protection Degree IP20 (IP44 and above optional)
Efficiency ≥92% Installation Indoor (outdoor optional), floor mounted
Duty Cycle
Continuous
Standard
IEC 61000-6-2, IEC 61000-6-4, IEC 62477-1

*Specifications subject to change without prior notice. We offer customization service, you can send us your detailed requirements. 

 

Features         

1

Double Conversion: AC-DC-AC true double conversion technology.

2

PWM / IGBT Design: Pulse-width modulation, 100% solid state circuit, static without moving parts.

3

Galvanic Isolation: Output with built-in isolation transformer to provide galvanic isolation.

4

Full Protection: Input & Output Circuit Breaker, Under / Over Voltage, Overload, Overheat, Short Circuit, etc.

5

Pure Sine Wave: High-frequency IGBT technology and isolation transformer guarantee a perfect sine wave output. 

6

Multiple Functions: Not only can convert and stabilize voltage & frequency, but also can change the phase number.

7

7'' Touch Screen: High degree of user-friendliness, display voltage, current, power, frequency, temperature, etc.

Gallery            

 

*All images are representative only. Detailed information on size, weight and other technical details should be confirmed with us. 

50hz to 60hz frequency converter
60Hz to 50Hz Frequency Converter
mobile ground power unit
60 to 50 hz frequency converter
industrial frequency converter
shore power converter

Buying Guides

 

Where the load type is inductive in nature, such as motors (fans, pumps, etc), solenoids, and relays, it is essential that high inrush current and short-time overload factors are fully considered

 

With motors (without a soft start facility) typically drawing on start-up current 5 to 7 times the stated rating of the motor.

 

A static frequency converter (SFC) is NOT a variable frequency drive (VFD).

 

Calculate the kVA Rating. 3-phase kVA calculation: voltage x amperage x 1.732 / 1,000; 1-phase kVA calculation: voltage x amperage / 1,000.

 

Determine the Input (primary) and Output (secondary) Voltage. Input voltage is the voltage of the source electricity that needs to be changed, output voltage is the voltage being supplied by the SFC.

 

Choose the Right Phase Number. 1-phase power is found in homes and small buildings, while 3-phase power is found in larger commercial and industrial settings.

 

Determine the Input (primary) and Output (secondary) Frequency. Input frequency is the frequency of the source electricity that needs to be changed, output frequency is the frequency being supplied by the SFC. In this page, input frequency is 60hz and output frequency is 50hz.

 

Identify the Load Type. Inductive or resistive, direct start or soft start, what is the maximum starting current, etc.

 

Choose Suitable Protection Degree. IP20, IP44, IP54, Containerized.

 

Identify Installation Conditions. It is necessary to know: indoor or outdoor installation; installation site altitude and climatic characteristics; ambient temperature.

Hot Tags: 220v 50hz to 115v 400hz frequency converter, China 220v 50hz to 115v 400hz frequency converter manufacturers, suppliers, factory, 1250KVA Static Hz Converter, 240V 50Hz To 220V 60Hz Static Frequency Converter, 250KVA Static Frequency Converter, 400KVA Solid State 50Hz 60Hz Frequency Converter, 60Hz To 50Hz Frequency Converter, Single Phase 120V 60Hz To 220V 50Hz Frequency Converter

Send Inquiry

whatsapp

Phone

E-mail

Inquiry